Hyundai Forum: Hyundai Performance Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
215 Posts
Discussion Starter · #1 ·
The last couple days the sound has been getting worse & worse. It seems to be coming from the dash that surrounds the gauges rubbing on the clear plastic that covers the gauges. The sound is REALLY bad. Has anyone had this problem & if so how did u fix it?


<hr noshade width=60% size=1 align=left>I find it hillarious that all my friends that buy stuff for their honda tell me to take their advice on performance parts, cause they know what theyre doing. All i can ever think is, U DRIVE A HONDA!!!!
 

·
Registered
Joined
·
181 Posts
i got some sounds coming from the dash too. It's due to the contact point between the plastic cover and my reset nob for the milage dail...

it only comes on once in a while... i use the oldest way to fix it... hit the top of my dash hard and it's gone <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>

but does anyone have a better way to cure that?


<hr width=60% noshade size=1 align=left>Black Tiburon 2001 SE
Naturally non-MOD <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>

"http://www.geocities.com/mourning/tiburon.jpg"
 

·
Registered
Joined
·
753 Posts
Morningla I got the same problem too I was going to take off the plastic cover but Kinalyx made a good point then all kinds of dust will get in there hmmmmm oh well just turn my music up a little hee hee<img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>


<hr width=60% noshade size=1 align=left>2000 Hyundai Tiburon Veil Side by March
http://www.streetsourcemag.com/ViewOwnerProfile.asp?ProfileID=6081
 

·
Registered
Joined
·
16 Posts
I went down to a hardware store and purchased a rubber o-ring.. costed a nickle, fit right around the hole and no more squeeking.


<hr width=60% noshade size=1 align=left>"I feel the need... the need for speed! Ooooowwww!!!"
 

·
Registered
Joined
·
56 Posts
My 2nd gen just loves to squeek and rattle. I get it from the trim above the door, the power window button console, under the shift boot, and in the back by the wheel wells. Wish I could just punch them to get them to stop, but I just have to accept that fact that my tib isnt brand new anymore.


<hr width=60% noshade size=1 align=left>
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top