Hyundai Forum: Hyundai Performance Forum banner

1 - 20 of 21 Posts

·
Registered
Joined
·
390 Posts
Discussion Starter #1
How are you all.

Just like to say HI as a first time user.
Anywho, I currently am finishing my 1999 Dodge Stratus, this is my current project car. I am in the planning stages of my next project car......a 2001 Tiburon.

I plan on doing a full race block, complete headwork, and alot of body and interior mods. I need info on an array of things tho.

1) What size are the OEM headlights/low and high beam, Foglights, and front turn signals. (bulb numbers please)

2) Are any LSD (Limited Slip Differentials) Avaliable for the tiburon, or just upgraded clutch's?

3) Are any upgraded flywheels avaliable?

4) One of my most important questions, where can I get the Cuda Design euro taillights?
<img src="http://dressup.hihome.com/Images/cuda1.jpg" border=0>

5) Where can I get the Cuda design front end only?

I will leave these questions right now. I have plenty more;) Also, just to confirm that this site is not Netscape friendly, cause it acts all goofey in Netscape. Thanks to all that reply and please post prices also.

Thanks,
croat


<hr noshade width=60% size=1 align=left>
 

·
Registered
Joined
·
2,951 Posts
Answer to number two.

Yes. www.vitekperformance.com sells LSD's

and 3

www.hdkautosport.com sells a flywheel.


<hr width=60% noshade size=1 align=left>Your death is comming on swift wings, and I am the rider.
<img src="http://israfel.org/auron/fmv02.jpg" <img src="http://israfel.org/auron/sprite4.gif"
 

·
Registered
Joined
·
14,259 Posts
i believe phantom grip also has an lsd. and email [email protected] about the cuda things.


<hr width=60% noshade size=1 align=left>my car is yellow. [email protected]
you should never underestimate
the predictability of stupidity.
 

·
Registered
Joined
·
390 Posts
Discussion Starter #4
Nice.

I have a list of things I want to get done to the car right as I get it, but I need to get a list complied first.

Do you know the price on the LSD off hand?

For Slotted/crossdrilled rotors, are the front and the back the same? Are there any out there that will not fade/corrode/rust (Stillen, AEM, ect?) Does EBC make Green stuff for the tiby?

I would love to know the bulb question also, and most importantly about the tails.


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
390 Posts
Discussion Starter #5
For the rotors, I see the Brembo makes them, are they for all 4 wheels? (AKA, 2 sets will replace all 4 )

Is their upper front and rear strut tower bars along with front and rear lower sway bars avaliable?

Does anyone make a coilpack, or any other upgraded ignition componant?


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
218 Posts
high beams-H7
low beams-H1
Fogs-H3
turn signals-can't remember, sorry, ihave my other ones that i took out in the garage, I'll get them for ya lata


<hr width=60% noshade size=1 align=left>'01 Cardinal Red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper
HDK clear corners
APC Hyper White turn signals
more mods soon...
Indiglo gauges soon...
Indiglo pedals soon...
 

·
Registered
Joined
·
22 Posts
Aren't those tail lights just the Altezza's? I think you can get them on this site or on ebay.com <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>They say the mind bends and twists to deal with the horrors of life... Sometimes it bends so much that it snaps in two - TM:Black
 

·
Registered
Joined
·
390 Posts
Discussion Starter #9
Well I know about Shark now, and they do sell the Cuda kit (I hope they will sell the fron seperate).

As for the tails, the ones in the picture are not the ones that Sharkracing sells. They sell the APC tailligghts (APC sucks biggggg).
The ones in the picture above have a different inside structre, different lens positions, look better, and I am sure are of better quality.



<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
747 Posts
Turn Signals...1157(FRONT) 1156(REAR)

small bumper lights-194
Door Light(if applicable)-194

you can mod the tib just as much as HONDUH's


<hr width=60% noshade size=1 align=left><img src="http://members.aol.com/mysilvertiburon/images/tiburon%20mst%20(s).jpg" border=0>
 

·
Registered
Joined
·
218 Posts
I was just going to give him those numbers but u beat me 2 it MST. hehe<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>'01 Cardinal Red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper
HDK clear corners
APC Hyper White turn signals
more mods soon...
Indiglo gauges soon...
Indiglo pedals soon...
 

·
Registered
Joined
·
176 Posts
2k&2k1 tib headlights are H7 low beam and H1 high beam.
Bio has them backwards.
Trust me, I've been through enough low beams to know that they are H7's (and the owner's manual states this as well).


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
218 Posts
ok thanx Reid, I had the rite numbers though, hehe. I'm bout to order my headlights from Contemporary Motor Sports as soon as I can.


<hr width=60% noshade size=1 align=left>'01 Cardinal Red Tibby
Alpine CD head unit
Pyle 600watt Amp
2 10" Rockford Subs
Altezza tails
red LED's in bumper
HDK clear corners
APC Hyper White turn signals
more mods soon...
Indiglo gauges soon...
Indiglo pedals soon...
 

·
Registered
Joined
·
176 Posts
Yeah, you all got the bulbs right. Just make sure you get the bulbs from a reputable company such as PIAA, Nokya, or other good brand names because some manufacturers who aren't reputable actually just paint the bulbs blue instead of applying a film coating and such. Anyway, here are the bulbs again:
Low beams: H7, 55w
High beams: H1, 55w
Foglights: H3, 55w
Turn signal: 1157, 27/8w
Position marker (little lights in front): 194, 5w
Rear turn signal: 1156, 27/8w
Two altezzas are available for the 2000-2002 Hyundai Tiburon, one made my Shark Racing and the other by APC. I personally have APC and no they are not shitty, they actually look great. But I think both actually look good and it is more upon personal taste to decide which one to get.


<hr width=60% noshade size=1 align=left>Michael G. Baber
 

·
Registered
Joined
·
390 Posts
Discussion Starter #15
Thanks all for your info.

I've been in the aftermarket world for a lonnnnngggg time, I know about what bulbs and what not to get. I work for the largest performace shop in the Midwest.

Please someone help me!!!!!!!!
I know about the Shark and APC tails.....but who makes the tails in the Cuda Design pircture?
Someone has to know, I mean you own the car!!!


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
2,652 Posts
the cuda pic has shark racing altezza lights... that's just how it is just different camera lighting, and s*it making them look bad ass


<hr width=60% noshade size=1 align=left>-nyne-
 

·
Registered
Joined
·
747 Posts
i love the HIPER brand H7's they are really white(but don't get H1's from them...yellow!)


<hr width=60% noshade size=1 align=left><img src="http://members.aol.com/mysilvertiburon/images/tiburon%20mst%20(s).jpg" border=0>
 

·
Registered
Joined
·
390 Posts
Discussion Starter #18
Ok. For bulbs, I want to get PIAA Plasma HID's and matching turns.

For the taillights, they are not the Shark tails....unless you can get me a different pic of the shrak tails.
Compare these 2 pictures, the above is the Cuda tails and below is the Shark tails...obviously 2 different styles.

<img src="http://www.grappia.com/t-h-c/gallery/Tiburon-Images/cuda-c1-tibby01.jpg" border=0>
<img src="http://www.sharkracing.com/Hyundai/00eurolights2.jpg" border=0>

PLEASE HELP ME!


<hr width=60% noshade size=1 align=left>
 

·
Registered
Joined
·
541 Posts
Those on the Cuda there are slightly different than the Sharkracing ones, they look more like they come from whoever is making the 1st gen tails. I am getting the Carbon Fiber tails next week hopefully, and CF emblems, and CF exhaust...then that Cuda spoiler. It's all gonna fit nicely together.
<img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>"Even in death we live!"
 

·
Registered
Joined
·
211 Posts
When I ordered the Cuda kit--I got the tails sent later on--and when I opened them I noticed they were the SR ones and not the ones on Cuda cars in the pics--so I asked Yam and Sam what the deal was--and they let me know that Cuda never put those tails into production--and those were only on the concept car(s)...Hope that clears any questions up=P

<img src=/images/forums/snitz/angel.gif width=25 height=20 border=0>
Daniela

p.s. the cuda ones ARE nicer in my opinion <img src=/images/forums/snitz/tongue.gif width=15 height=15 border=0><img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left>
 
1 - 20 of 21 Posts
Top