Just like to say HI as a first time user.
Anywho, I currently am finishing my 1999 Dodge Stratus, this is my current project car. I am in the planning stages of my next project car......a 2001 Tiburon.
I plan on doing a full race block, complete headwork, and alot of body and interior mods. I need info on an array of things tho.
1) What size are the OEM headlights/low and high beam, Foglights, and front turn signals. (bulb numbers please)
2) Are any LSD (Limited Slip Differentials) Avaliable for the tiburon, or just upgraded clutch's?
3) Are any upgraded flywheels avaliable?
4) One of my most important questions, where can I get the Cuda Design euro taillights?
<img src="http://dressup.hihome.com/Images/cuda1.jpg" border=0>
5) Where can I get the Cuda design front end only?
I will leave these questions right now. I have plenty more Also, just to confirm that this site is not Netscape friendly, cause it acts all goofey in Netscape. Thanks to all that reply and please post prices also.
<hr width=60% noshade size=1 align=left>Your death is comming on swift wings, and I am the rider.
<img src="http://israfel.org/auron/fmv02.jpg" <img src="http://israfel.org/auron/sprite4.gif"
I have a list of things I want to get done to the car right as I get it, but I need to get a list complied first.
Do you know the price on the LSD off hand?
For Slotted/crossdrilled rotors, are the front and the back the same? Are there any out there that will not fade/corrode/rust (Stillen, AEM, ect?) Does EBC make Green stuff for the tiby?
I would love to know the bulb question also, and most importantly about the tails.
Aren't those tail lights just the Altezza's? I think you can get them on this site or on ebay.com <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>
<hr width=60% noshade size=1 align=left>They say the mind bends and twists to deal with the horrors of life... Sometimes it bends so much that it snaps in two - TM:Black
Well I know about Shark now, and they do sell the Cuda kit (I hope they will sell the fron seperate).
As for the tails, the ones in the picture are not the ones that Sharkracing sells. They sell the APC tailligghts (APC sucks biggggg).
The ones in the picture above have a different inside structre, different lens positions, look better, and I am sure are of better quality.
2k&2k1 tib headlights are H7 low beam and H1 high beam.
Bio has them backwards.
Trust me, I've been through enough low beams to know that they are H7's (and the owner's manual states this as well).
Yeah, you all got the bulbs right. Just make sure you get the bulbs from a reputable company such as PIAA, Nokya, or other good brand names because some manufacturers who aren't reputable actually just paint the bulbs blue instead of applying a film coating and such. Anyway, here are the bulbs again:
Low beams: H7, 55w
High beams: H1, 55w
Foglights: H3, 55w
Turn signal: 1157, 27/8w
Position marker (little lights in front): 194, 5w
Rear turn signal: 1156, 27/8w
Two altezzas are available for the 2000-2002 Hyundai Tiburon, one made my Shark Racing and the other by APC. I personally have APC and no they are not shitty, they actually look great. But I think both actually look good and it is more upon personal taste to decide which one to get.
<hr width=60% noshade size=1 align=left>Michael G. Baber
I've been in the aftermarket world for a lonnnnngggg time, I know about what bulbs and what not to get. I work for the largest performace shop in the Midwest.
Please someone help me!!!!!!!!
I know about the Shark and APC tails.....but who makes the tails in the Cuda Design pircture?
Someone has to know, I mean you own the car!!!
Ok. For bulbs, I want to get PIAA Plasma HID's and matching turns.
For the taillights, they are not the Shark tails....unless you can get me a different pic of the shrak tails.
Compare these 2 pictures, the above is the Cuda tails and below is the Shark tails...obviously 2 different styles.
Those on the Cuda there are slightly different than the Sharkracing ones, they look more like they come from whoever is making the 1st gen tails. I am getting the Carbon Fiber tails next week hopefully, and CF emblems, and CF exhaust...then that Cuda spoiler. It's all gonna fit nicely together.
<img src=/images/forums/snitz/approve.gif width=15 height=15 border=0>
<hr width=60% noshade size=1 align=left>"Even in death we live!"
When I ordered the Cuda kit--I got the tails sent later on--and when I opened them I noticed they were the SR ones and not the ones on Cuda cars in the pics--so I asked Yam and Sam what the deal was--and they let me know that Cuda never put those tails into production--and those were only on the concept car(s)...Hope that clears any questions up=P
p.s. the cuda ones ARE nicer in my opinion <img src=/images/forums/snitz/tongue.gif width=15 height=15 border=0><img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Hyundai Forum: Hyundai Performance Forum
807K posts
61.1K members
Since 2001
A forum community dedicated to all Hyundai models owners and enthusiasts. Come join the discussion about modifications, classifieds, troubleshooting, maintenance, reviews, and more for your favorite models!