Hyundai Forum: Hyundai Performance Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
464 Posts
korea. or the U.S.

a better question would get you a better answer...<img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>


<hr width=60% noshade size=1 align=left>Yes, you.
 

·
Registered
Joined
·
6,117 Posts
See this thread:
http://www.hyundaiperformance.com/forums/snitz/topic.asp?a=&t=4624


<hr width=60% noshade size=1 align=left>Later,
Aaron Britt
Events Coordinator, Las Vegas F-body Assoc.
'97 Trans-Am
'96 Elantra GLS
"The shortest distance between two points is a straight line........but, it's not as much fun."
<img src="http://www.speedcraving.com/i8acobra/flag.gif">
 

·
Registered
Joined
·
756 Posts
<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>Local parts stockist man, or if you're in my situation and cant afford it new, just go to the junkyard and have one ripped out of any beta for you! After that it's down to you, a couple of bottle brushes and plenty of kerosene and degreaser, and it looks as good as new!


<hr width=60% noshade size=1 align=left>Power without the skill to control it is a dangerous thing...
 

·
Registered
Joined
·
96 Posts
look in the for sale forum, i have one for you


<hr width=60% noshade size=1 align=left>ractive cold air intake,ractive exhaust
4-1 headers, straight pipe to exhaust no cat
shark fenders and fin
chrome 16's 215/40's
 

·
Registered
Joined
·
1,893 Posts
contact your local junkyards...ask for a crashed tibby or elantra 1997 thru 2001 for tibby 1997-2000 for Elantra.

The IM's on those make/model/years are all the same.

The 2001 elantra IM is different, as is the 2001 elantra TB.


<hr width=60% noshade size=1 align=left>quote from 4DoorGL: "Told you. Random is cool as hell in person, even if he is a dick on the net <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0> (j/k)"

Leave it to Random to Needlessly complicate things.
 

·
Registered
Joined
·
464 Posts
Which begs the obvious question, WHAT is different between the manifolds and TBs?<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>Yes, you.
 

·
Registered
Joined
·
1,893 Posts
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
Which begs the obvious question, WHAT is different between the manifolds and TBs?
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

The IM is a different design. The plenum chamber is shorter and smaller, and the intake runners are also shorter and straighter.

The TB is also a different design. They use a different TPS and different TPS mounting, and they also mounted some new goofy sensor on the TB housing.


<hr width=60% noshade size=1 align=left>quote from 4DoorGL: "Told you. Random is cool as hell in person, even if he is a dick on the net <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0> (j/k)"

Leave it to Random to Needlessly complicate things.
 

·
Registered
Joined
·
464 Posts
so is the new manifold a "performance upgrade" if the old TB will bolt to it? shorter runners = higher revs?
<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0><img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>


<hr width=60% noshade size=1 align=left>Yes, you.
 

·
Registered
Joined
·
1,893 Posts
I would say that the old IM is better.

The longer runners in the old IM should give better midrange and top end. The shorter runners in the new IM would ONLY give top end.

The smaller plenum chamber would also only benefit top end, whereas the larger plenum of the old IM benefits low and mid.

It's a moot point however, and they are not interchangeable.


<hr width=60% noshade size=1 align=left>quote from 4DoorGL: "Told you. Random is cool as hell in person, even if he is a dick on the net <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0> (j/k)"

Leave it to Random to Needlessly complicate things.
 

·
Registered
Joined
·
464 Posts
LOL did you miss the <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0><img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0> ?

I guess if you were making a drag-only car... ;) But then if you were doing that you'd prolly want the solid (not hydraulic) valvetrain anyhow...<img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>


<hr width=60% noshade size=1 align=left>Yes, you.
 
1 - 11 of 11 Posts
Top