Hyundai Forum: Hyundai Performance Forum banner
1 - 1 of 1 Posts

· Registered
1,893 Posts
Sand with 1000 or 800 grit sand paper, then wash the part in degreaser to remove armor all residue, and dust from sanding. RINSE throughly, then let dry overnight.

Use "krylon" automotive primer. If found it at my local hardware store and it KICKS BUTT! 2 coats of that (with the above instructions) and any paint will stick, no problems!

Leave it to Random to Needlessly complicate things.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.