Hyundai Forum: Hyundai Performance Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
Hello all,

Just a quick question. I've been saving up money over the winter and buying some different mods (ie Exhaust, header, cams, pulley, and hopefully bbtb and bim) and I just had a question. Can or should I put these mods on all at once, or should I put them on slowly one at a time to let the ecu learn? Thanks! <img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>

Tom


<hr noshade width=60% size=1 align=left>Black 5 Spd 1998 Tiburon SE
AOS CAI
 

·
Registered
Joined
·
756 Posts
<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>Your ECU isn't AI...it doesn't learn, it only compensates as it's programmed to. You can put all the mods on at once if you want, that way you'll save big on labour costs, and thats what I'd reccomend.

Note though, please make sure the installation staff DO NOT RE-USE ANY GASKETS!!!

Good luck!


<hr width=60% noshade size=1 align=left>Power without the skill to control it is a dangerous thing...
 

·
Registered
Joined
·
158 Posts
Discussion Starter · #3 ·
Cool... thanks a lot! Save big on labour costs? Hehehe... I got a friend who is a licensed mechanic doing it for a case of beer.

Excellent. <img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

Tom<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>Black 5 Spd 1998 Tiburon SE
AOS CAI
 
1 - 3 of 3 Posts
Top