Hyundai Forum: Hyundai Performance Forum banner

Noisy clutch release cylinder *Pic and vid included*

1043 Views 3 Replies 4 Participants Last post by  meee2yo
This only happens when the Engine is hot.

[Edited by Korean_Redneck on Apr 19, 2006 6:30 PM]
See less See more
1 - 4 of 4 Posts
For some reason any video on youtube doesnt play audio for me. However I would suggest you grease it up, even try some wd-40 and see if it goes away first.
i think you're clutch pedal bushing's are dry, try spraying some white grease on them,

try to open the rubber grommet that cover's the slave cylinder and spray some lube on the clutch linkage assembly.

speaking of clutch, is there something that can repalce a slave cylinder?
grease your bearings

or get the seal out of your engine compartment lol

It's hard to tell where the sound is coming from since it's a video and we are not in person. the best way to do it is to get someone else to push in the clutch while you are under the hood. good luck and hopefully it's not anything major (or minor in the tranny)
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.