Hyundai Forum: Hyundai Performance Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
IN the wet, round a round about slowly, slipped, mounted the curb and buckled the front lower arm assembly <img src="http://www.hmaservice.com/xml/graphics/EI/EIDA200A.gif" border=0>
Ive also managed to bend the bolt on the tie rod. That appears to be the only visible damage but what else should I inspect or have problems with?
The cars still drivable to a degree but it aint moving, any suggestions?


<hr noshade width=60% size=1 align=left>"I dont suffer from insanity, i enjoy ever minute of it"
 

·
Registered
Joined
·
1,474 Posts
Please watch the use of Profanity


<hr width=60% noshade size=1 align=left><img src="http://www.hyundaiperformance.com/upload/crochunter.jpg">
<b>Croci, look at the size of the wamdingo!</b>
<a href="http://Shop.HyundaiPerformance.Com">Shop.HyundaiPerformance.Com</a>, your one-stop Hyundai performance store (coming soon)
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #3 ·
<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
Please watch the use of Profanity


<hr width=60% noshade size=1 align=left>http://www.hyundaiperformance.com/upload/crochunter.jpg">
<b>Croci, look at the size of the wamdingo!</b>
<a href="http://Shop.HyundaiPerformance.Com">Shop.HyundaiPerformance.Com</a>, your one-stop Hyundai performance store (coming soon)
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>
<img src=/images/forums/snitz/mad.gif width=16 height=16 border=0>

<img src=/images/forums/snitz/evil.gif width=15 height=15 border=0> F**k sorry but ud be pretty p'off 2! <img src=/images/forums/snitz/evil.gif width=15 height=15 border=0>
<img src=/images/forums/snitz/angel.gif width=25 height=20 border=0> Watchin my profanity <img src=/images/forums/snitz/angel.gif width=25 height=20 border=0>

<img src=/images/forums/snitz/moon.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>"I dont suffer from insanity, i enjoy ever minute of it"
 

·
Registered
Joined
·
49 Posts
I had the same thing a month ago. The dealer first changed the lower arm, because that was visibly bent. But then they could not get the car aligned within specs. Then they took the whole left side suspension apart and changed the knuckle. There was no visible damage to it, but after replacing it the car could be aligned within specs.

Suspension damage is no fun.<img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0> <img src=/images/forums/snitz/uhh.gif width=15 height=15 border=0> I have the feeling that the car is driving different than before. But it is aligned within spec, it does not pull left or right on a straight road. I can do 100mph and the steering wheel does not shake or vibrate or anything. <img src=/images/forums/snitz/oogle.gif width=15 height=15 border=0>




<hr width=60% noshade size=1 align=left>
Simp...
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #5 ·
Thanxs simp, ill look into that. Ive ordered a lower control wishbone and the local mechanic inspected it. He agreed it was the only visible damage. I will see how it goes and what else needs to be replace. The lower arm however set me back ~$270au <img src=/images/forums/snitz/cry.gif width=16 height=16 border=0>


<hr width=60% noshade size=1 align=left>"I dont suffer from insanity, i enjoy ever minute of it"
 
1 - 5 of 5 Posts
Top