Hyundai Forum: Hyundai Performance Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
1,787 Posts
doesnt the S-coupe have the same tranny as the 1.5 Accent? If so then the 1.6Accent has the same tranny as well.
 

·
Premium Member
Joined
·
631 Posts
Discussion Starter · #3 ·
According to my knowledge its not they same

The Scoupe gearbox is very similar to the Accent however, the scoupe takes the Tiburon Flywheel so i dont know. Thats why i am asking.( i had a accent race clutch fitted to my scoupe turbo and it didnt fit so they tried that of a tiburon and it fitted and work's great)

So its like a Hybrid Box?....

the PG is avalible for the Accent 1.5 and 1.6 hence 1995 - 2006 HYUNDAI ACCENT

SO what PG do i buy? a Accent or a TIB?
 

·
Registered
Joined
·
198 Posts
As i know a standard flywheel for Accent(1.3 - 1.5sohc) is 185mm.
On Accent 1.5/1.6 Dohc the flywheel is 200mm.
Scoupe T is also 200mm.

You go for the Accent one PG. The Tib one is suited for 2.0...
 

·
Registered
Joined
·
198 Posts
Wait Scoupe has the same flywheel as all Beta engines (1.6/1.8/2.0)? Bah, didn't know...

How can our small 200mm handle so much power then??? :)
 

·
Registered
Joined
·
845 Posts
The above statment would be the best option BUT how much money are we talking and where can you get a LSD for a Beta?
Your talkin $1500 minimum and Kaaz and Quaife both make an lsd that will work with the beta tranny. The quaife part is for a mitsubishi though.
 

·
Registered
Joined
·
49 Posts
so i need to get a Beta gearbox $$$$ get it rebuilt $$$ get LSD $$$$$$ then get it all put together $$$$

:eek:
welcome to the world of racing :)


My setup was

Tranny (john shep stage 4) $4200
Kaaz LSD $1200
Clutch kit $1200
Stage 5 race axles $1300


Things dont get cheap once you make some power.
 

·
Premium Member
Joined
·
631 Posts
Discussion Starter · #13 ·
Dont get a Phantom Grip...it will cuz alot of bad things to your tranny if it ever lets go.

Go with a real diff (KAAZ)
can you explain more? Apparently PG with semi slicks destroy's Cv' joints...
 

·
Registered
Joined
·
1,787 Posts
can you explain more? Apparently PG with semi slicks destroy's Cv' joints...
so for some of you beta swap guys you should prolly swap a scoupe tranny...
 
1 - 14 of 14 Posts
Top