Hyundai Forum: Hyundai Performance Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi well Ive got all the Bits to turbo this 97 Tib. I am looking at the SMT6 as a piggy back to time /fuel a second rail of 330cc injectors
aiming for approx 300hp or little less
The current ecu is the Australian Model + map sensor and as such NO OBDII So not all piggy backs work.
My question is, a) is there a prefered piggy back for fueling
can the SMT6 control injectors without using a second fuel rail but just a set of larger injectors. As adding a second rail is a bit of a task.
thanks
 

·
Registered
Joined
·
1,000 Posts
goggle megasquirt

It is a do it yourself stand alone. You can run what ever injector set up you want.
 

·
Registered
Joined
·
51 Posts
it can control up to 310.........use 290's to be safe, since i see plenty guys doing that.......limit to 10-12lbs.
i have one i might sell you!

also got a unichip piggyback, but you will need a local unichip dealer to tune it or buy the software.
the unichip will control up to 210cc injector...But it can also run second fuel rails or a 5th injector.
then you can run up to 18lbs... 5th injector kit cost $149 @ jattus.com
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
Thanks Guys a deal came my way with a second Fuel rail of 290cc 's and and SMT6
So working on that model

So Far in engine building mode/. lool
 
1 - 4 of 4 Posts
Top