Hyundai Forum: Hyundai Performance Forum banner

Selling my Unorthdox crank pulley from my LC2 1.6L

1257 Views 14 Replies 6 Participants Last post by  GLaccent01
This is the Unorthdox crank pulley for the 1.5L and it fits the 1.6L

I recently took it out because I figure I don't need all that.
would like to sell it
It was $250 US to send to me in Canada all together when I bought it, still like new.
so I would like to ask for $190 SHIPPED to US or CANADA.
or $175 if you want me to ship with standard shipping.

accept paypal, i am verified
1 - 15 of 15 Posts
E-mail me at [email protected] I'm interested.
It's still here, whoever hands over payment first gets it.
Did it work well on your car? Any drawbacks? I'm very interested so let me know.
Non, it seems to idle very smoothly,unlike some vehicle's aftermarket pulley which is not well balanced.. Fitment is perfect, including the key slot for the pulley to mount on-to (ALOT of the aftermarket pulleys don't)
With the pulley installed, the car rev faster, the choke from downshifting has dramatically DECREASED, so it feels alot smoother going up or down rpm ( or should say easier? )

Fuel consumption, I have always been getting good mileage. But I assume it would help if the engine itself is running easier.

the belt part number is K040320 from NAPA Auto (Gates made)
I can give you 140 shipped right now just let me know. Thanks
Anyone offer more?
I'll ship with UPS w/tracking as standard shipping.
what did it sell for?
Hello Hermes Joseph Lee aka Forbidden I just got the package right before work and to my surprise I receive a transmission filter! I was like what the heck is this. Where is my pulley that I bought from you? I am real tired from work right now and I will try real hard to be civil. My friend I work hard for my money and I do not need any of this unnecessary things. Maybe it was an honest mistake of putting in a transmission filter in the package the was labeled pulley. I hope you were not playing me. I do not think you are because you have been helpful Whatever it is this needs to be resolved. Either you send that accent pulley as soon as possible or you give me my all my money back in full $145. Hopefully it was just a mistake because I do not have time for this and I work too hard to just give away my money. Please let us resolve this immediately. It might have just been a mistake, but I really hate it when these things happen. I hope you understand why.

Jerome aka gturismo12

In a message dated 6/3/2006 10:19:14 A.M. Pacific Standard Time, [email protected] writes:
Yes, I notice that too, I don't know what happen as well.
What I believe is that it is probably sent out already.
Sorry if this really concerns you.
As I have the receipt for it I could ask them on monday.

This was all the communication we had through email. I think it was pretty clear that I wanted to buy an accent pulley and you were selling an accent pulley.

*In a message dated 5/21/2006 9:54:10 A.M. Pacific Standard Time, [email protected] writes:
I will ship the pulley first thing tuesday, because we have a long holiday in Canada. It will be arriving at around mid or end of the week after or so (According to the estimate).

Thank you for your business.
Hi thanks again. Will I get a tracking number as well? Just let me know.

*I am sending the payment right now. Please let me know when payment is received. I am sending to [email protected] For the UR pulley for a 1.5L accent right. Ok here is my address 1xxxxxxxxxxxxxxxxx9. Please send it as soon as possible. Thank you for your time and patience.


*In a message dated 5/20/2006 11:49:55 P.M. Pacific Standard Time, [email protected] writes:
I'll take that $145.
This is the picture for the pulley, but mine is blue instead of this silver.
Exactly as shown.
I had it packaged already so it'll be shipped once payment is made.

What does it come with? Just the pulley are there any other stuff that is needed for the install that comes with? I think it just bolts up with the stock bolts to the crank right? I will send you the payment first thing in the morning via paypal. I'm working on a project now so tomorrow is that ok. Thanks. BTW where in canada do you live is it near VC? Ok take care gots to go.

*I'll take that $145.
This is the picture for the pulley, but mine is blue instead of this silver.
Exactly as shown.
I had it packaged already so it'll be shipped once payment is made.

----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Saturday, May 20, 2006 11:33 PM
Subject: Re: Crankpulley for 1.6

Hello can I take it for 145 please? Can I see pics of it please? Ok after I see the pics I will send the payment tomorrow. I dont have work so I will wait for it. How long will the shipping take? paypal to this name [email protected] Ok thanks just let me know.

*Ok, first you unbolt your stock pulley, and than fit this one in it. It'll fit directly. You'll have to make sure you have the slot key from the stock pulley when you take it off.
You'll need to get a belt from NAPA AUTO Part# K040320 made by Gates

I hope you understand my concerns and let us get this resovle immediately!
See less See more
Where is my pulley?:depressed:
Wow that sucks...why would someone do such a thing? I hope you get it back or track him down and kick his ass because thats not acceptable. If you're still looking for a blue UR underdrive pulley i have one for sale for 130 shipped.
In a nutshell NO ONE BUY FROM f0rbidden BECAUSE HE IS A RIP OFF not only that but to be such a lame ****** and screw someone out of $175 dollars is just downright dirty and messed up. I hope he knows that what goes around comes around and he will get it a lot worse than you. He should be paying the consequences soon. watch out for that moron.
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.