seriously considering 4g63 swap

762 Views 1 Reply 2 Participants Last post by 4doorGL, Nov 1, 2001

lucidequilibrium

Discussion Starter · Nov 1, 2001

Just to make sure, the 4g63 motor will fit into a 92 Excel without major mods to the mounts and stuff, right? If so, and I get a transmission along with the engine, would everything align correctly? I know I would need custom exhaust...1.75 inches won't do. Is there anything else that would need to be considered? Axles? Anything? I dont know nearly enough for this sort of thing, but most of this will happen after Advanced Individual training in the National Guard, which will greatly increase my knowledge. Thanks for your help.

Lucid
92 Excel 3 door
No mods, 15 inch wheels, awaiting springs...
Hopefully more to come.

Save

1 - 1 of 2 Posts

4doorGL

· #2 · Nov 1, 2001

I'd recommend swapping out your axles as well, but you'll most likely need to shorten whatever axles you use.

<img src="http://www.hyundaiperformance.com/upload/4doorGLSig.gif" border=0>

Save

1 - 1 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month