Hyundai Forum: Hyundai Performance Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
8,316 Posts
It wouldn't work.

You have the wrong motor to begin with. Look at your motor and tell me if the intake is on the passenger side or the drivers side of your motor, and if possible, post a picture.

--------------------------------------------
I drive a slow car.
0 to 60 in 11 seconds (look out!)
 

· Registered
Joined
·
8,316 Posts
If you have a mitsu engine originally, you'll have to stick with a mitsu engine.

The only way he could swap a 2.0L Beta in is if he had a Hyundai motor originally.

The 4G63T would be a VERY good choice for a swap into an Excel.

--------------------------------------------
I drive a slow car.
0 to 60 in 11 seconds (look out!)
 

· Registered
Joined
·
8,316 Posts
You would be correct blytz <img src=icon_smile_big.gif border=0 align=middle>.

--------------------------------------------
I drive a slow car.
0 to 60 in 11 seconds (look out!)
 

· Registered
Joined
·
8,316 Posts
Agreed. AWD would generally be a waste of money unless you wanted to use the car for rally or autocross.

--------------------------------------------
I drive a slow car.
0 to 60 in 11 seconds (look out!)
 

· Registered
Joined
·
8,316 Posts
Now that you put it that way, I would go for it. If you already have the AWD unit and the mechanic is only charging you that much for it.

Just do it <img src=icon_smile_big.gif border=0 align=middle>.

--------------------------------------------
I drive a slow car.
0 to 60 in 11 seconds (look out!)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top