[ACCENTMVI]

are these worth getting and what sort of improvement should i see on a 1.5 mvi accent?
and how is are they to fit?

cheers

greg<img src=icon_smile_wink.gif border=0 align=middle>

 

[AUTOBOT]

You will se some nice gains if you add a new throttle body. I would say yes it is worth it.

<img src="http://www.transfans.com/logospin.gif" border=0><img src="http://www.coreyandjayshow.com/pee.gif" border=0><img src="http://www.hyundaiperformance.com/upload/binladen.jpg" border=0>

 

[ACCENTMVI]

are they easy to fit?

 

[4doorGL]

It is a fairly easy install.

What other mods do you have done? You'll see the best results if you already have an intake and if you get your intake manifold ported to match the throttle body.

Also when you get a header and exhaust now, you'll see a larger gain.

<img src="http://63.102.174.92/upload/4doorGLSig.gif" border=0>

 

[ACCENTMVI]

well i have a ralli art exhaust.superchipped. and a skimmed head. also have a pipercross induction kit. where abouts does the throttlebody go just out of interest?

 

[Rudy]

your throttlebody is the thing attached to the end of the intake manifold. its between the im and your intake.

<img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected].com

 

[hy-brid]

I'm running a Tiburon Throttlebody and MAF sensor on my 95 Accent/Excel. Makes a pretty big difference. Only problem though is that it isn't getting as much fuel as it should.

"Close with and destroy the Enemy"

 

[KnOcKeR]

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
well i have a ralli art exhaust.superchipped. and a skimmed head. also have a pipercross induction kit. where abouts does the throttlebody go just out of interest?

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=1 id=quote>

as rudy said... but where did u get ur chip???

<img src="http://projectgsi.wtfisup.com/images/sig.jpg" border=0>
http://projectgsi.wtfisup.com
Now let's put those Honduhs to shame!!
***IR2 is an angel***

 

[xgkraverx]

what happens if i get a tiburon tb? how will i give the car more fuel?

*17 inch rims
*clear corners
*black mesh grill
*mini intake
*exhust muffle
*coil overs (coming soon)

 

[Rudy]

new fuel pump and larger injectors. you might also want to look into a piggy back system so that you can tune it for optimal performance.

<img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]

 

[xgkraverx]

huh? piggy back? lol what is that?

*17 inch rims
*clear corners
*black mesh grill
*mini intake
*exhust muffle
*coil overs (coming soon)

 

[hy-brid]

I'm fixing my fuel problem via a TEC II that I just bought. Rudy's right too, a in-line fuel pump with larger injectors will work too. Maybe a fuel pressure regulator on top of that. I'll probably do a fuel pump down the line.
In order to fit the Tib throttlebody you will have to get custom fabrication done to the flange of the Intake manifold.
Here's the math:

Aluminum welded around edge of flange
re-faced
new bolts tapped in
+ smooth out the welds to clean it up
--------------------------------------
= Bling Bling $$$

"Close with and destroy the Enemy"