Hyundai Forum: Hyundai Performance Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
i can't seem to find a throttle body spacer for my 2000 elantra..i know that some of the earlier mitsuibishi's has a throttle body similar, but i don't know if its the same. any help would be nice. thanks
APplcation:
2.0 beta engine 97-01 tiburon
or 2.0 99-00 elantra.
 

·
Registered
Joined
·
29 Posts
sharkracing.com has a 99-00 Elantra Phenolic Intake Spacer
the following copied from sharkracing.com:

Shark Racing Intake Spacer.

The Shark Racing Intake Spacer is made from composite materials, and installs between the upper and lower intake manifolds. The composite material has a very low thermal conductivity, and will substantially lower the temperature of the intake manifold, resulting in more power. Additionally, the resulting increase in intake volume will translate to even more power.

The dyno chart posted is on a Tiburon 2.0 model with manual transmission. The first run is a base run without the spacer, and the second is including the spacer. No other changes were made.

Results - Tiburon 2.0 Manual

Wheel Horsepower - 126.90 --> 132.84 = 5.94 HP increase
Wheel Torque - 17.09 (123.6 lb-ft) --> 18.03 (130.4 lb-ft) = 0.94(6.8 lb-ft) increase
All testing was conducted under controlled conditions, at a major performance shop in Korea called Kronos.

Installation is very easy, involving only removing the intake manifold and installing the spacer. Installation time will take about one hour with an experienced mechanic.


Price may change at any time.
 

·
Registered
Joined
·
30 Posts
sharkracing.com has a 99-00 Elantra Phenolic Intake Spacer
the following copied from sharkracing.com:

Shark Racing Intake Spacer.

The Shark Racing Intake Spacer is made from composite materials, and installs between the upper and lower intake manifolds. The composite material has a very low thermal conductivity, and will substantially lower the temperature of the intake manifold, resulting in more power. Additionally, the resulting increase in intake volume will translate to even more power.

The dyno chart posted is on a Tiburon 2.0 model with manual transmission. The first run is a base run without the spacer, and the second is including the spacer. No other changes were made.

Results - Tiburon 2.0 Manual

Wheel Horsepower - 126.90 --> 132.84 = 5.94 HP increase
Wheel Torque - 17.09 (123.6 lb-ft) --> 18.03 (130.4 lb-ft) = 0.94(6.8 lb-ft) increase
All testing was conducted under controlled conditions, at a major performance shop in Korea called Kronos.

Installation is very easy, involving only removing the intake manifold and installing the spacer. Installation time will take about one hour with an experienced mechanic.


Price may change at any time.
---------
Don't you mean that it installs at the head, between the intake and the head????
 
1 - 8 of 8 Posts
Top