[GreatWhite2k1]

I'm trying to wire some stuff in my car but I cant find a way to get wires from my dash through the fire wall to the battery. Can anybody help me?


<hr noshade width=60% size=1 align=left>Alpine White 2001 Tiburon 5-Speed

 

[^saint]

ok there is one whole way up in the firewall of the Tiburon. It is up dehind the dash area. I am sure if you get under the steering wheel with a lot of light, and look for it you can find it. It has a gromet in the whole, so that is what you are looking for.

I just drilled through mine, just make sure you aren't hitting anything important!<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><img src="http://a476.g.akamaitech.net/7/476/34/799226debcbd69/animal.discovery.com/sgallery/shopping/crochunter.jpg" border=0>
<b>AHHHH Croci, look at the size of the wamdingo!</b>

 

[tibmeister]

From the engine bay, trace the wiring harness
to the firewall. There is a rubber boot by the throttle body. I just poke a hole and inserted my 10ga. power wire for my amp. It'll come out behind the stereo head unit.

• 
  
  
  <hr width=60% noshade size=1 align=left>

 

[shock6791]

I found a hole behind the fuse box inside the car. That is where I ran my amp wiring. I ran it behind the fenderwell cover and through this hole, under the door sill, and through the back panel. Just take off the panel that contains the fuse box cover and pull bqack that pice of material behind it, there should be a hole. I post some pics. when I get some.


<hr width=60% noshade size=1 align=left>Speed kills, drive a civic.

 

[Bjurr]

There is also a hole and grommet in the firewall on the passenger side. Just look under the dash. My nitrous goes through that.

I don't know if SE models have something going through that, but base models don't.


<hr width=60% noshade size=1 align=left>

 

[WoahSharky]

I had to drill a hole, its on the passenger side under the glove compartment. None of the holes were big enough for two 4 guage power wires, just remenber to make sure you get a good gromet and make sure its sealed if you drill.<img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>line em up

<img src="http://members.aol.com/Roylty1/myhomepage/lakeerieshark.gif" border=0>

 

[Bjurr]

Well, if you route boost cables inthe firewall, that's another story... <img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>


<hr width=60% noshade size=1 align=left>