Hyundai Forum: Hyundai Performance Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter #1
Hi guys, it is about time I post something.
I've got dozens of questions but I'll start simple.
Is it possible to exchange my brake system ( 91 Scoupé 1.5L 8v) with that from the mitsubishi mirage 1.8 16v?
Also, I'd like to know what a guy needs to swap the engine with the mitsu 4g63T.
Then, I need some bodykits for my scoupé.
Then I want to know if there is anybody who drives a Scoupé with bigger wheels than 17" and has lowered his car?
(I drive with 17" but I want it to be more extreme)
Also I would like to know if the tacho from the 93-95 GT Turbo Scoupé is to be swapped in my model?
Well That's it for now, till I get more ideas( which I have)

C Ya


http://auto.clubs.nl/scoupeclub
( a scoupé club for tuning and pics)
 

·
Registered
Joined
·
95 Posts
Discussion Starter #2
Come on guys, I'm sure you know a lot more about it then I do, eg websites or other tuning firms.

Reply to me.
laterzzzz
<img src=icon_smile_8ball.gif border=0 align=middle>
 

·
Registered
Joined
·
14,259 Posts
hmmm one of our scoupe members should be able to help you out, but i dont know where they all are <img src=icon_smile_wink.gif border=0 align=middle>

<img src="http://63.102.174.92/rudy_mini2.jpg" border=0>
my car is yellow. [email protected]
 

·
Registered
Joined
·
21,319 Posts
The 4g63T should fit. I believe som peeps on this board have already done it and will be alot easier, cheaper, and give you better gains the 2.0 beta will.

As far as rims, bigger then 17" will be extreme but I dunno if you will be able to or not.

The tach question I dunno either but i would assume it can be done with ease. I am only going off the fact that the tach from the Accent Gt can be swapped into my accent if I choose. (I know they are 2 totally different cars)

I am sorry about the not so sure answers but I realy do not know 100% and only answered cause you have been waiting so long for answers to good questions.<img src=icon_smile_sad.gif border=0 align=middle> Hopefuly someone who is 100% sure will be along soon.

Come on guys if you know speak up<img src=icon_smile_dissapprove.gif border=0 align=middle>

<img src="http://www.transfans.com/logospin.gif" border=0><img src="http://www.coreyandjayshow.com/pee.gif" border=0><img src="http://www.hyundaiperformance.com/upload/binladen.jpg" border=0>
 

·
Registered
Joined
·
8,316 Posts
The tach will not be easily swappable as the 91 S-Coupe is a different body design than the 93-95 S-Coupe, therefore the instrument clusters will be different.

As for swapping engines, your best bet would be to go with a Mitsu engine, preferably a 4G63 from a 1st gen Eclipse.

<img src="http://63.102.174.92/upload/4doorGLSig.gif" border=0>
 

·
Registered
Joined
·
42 Posts
Hey man, I have a 94 Scoupe. I think the 17's are the largest you can use. I have to run spacer on the rear of mine to fit the 17x7.5. As far as the tachs I think all the Scoupes had the same interior. If you go to the Yahoo club for Scoupes you can see the interior of a 91-92 body style car and it has the same dash as my 94.
 

·
Registered
Joined
·
95 Posts
Discussion Starter #8
Well thanx for the replies.
Now I'm going to a car graveyard(sorry don't know the exact word) and rip out the tacho.
The lowering set are coming this year( almost) and then I can see if there's enough space for one or 2 sizes bigger alloys.
About the 4g63t engine.
When I know what exact thing need to be replaced and transferred I will go and do it.

Oh by the way, does anybody know if the trunk from the scoupé and a lancer are the same.
If so I can go and buy an Evo Spoiler.

Greetz
 

·
Registered
Joined
·
21,319 Posts
<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
Now I'm going to a car graveyard(sorry don't know the exact word) <hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=1 id=quote>

We call it a junk yard or salvage yard. <img src=icon_smile_big.gif border=0 align=middle>

<img src="http://www.transfans.com/logospin.gif" border=0><img src="http://www.coreyandjayshow.com/pee.gif" border=0><img src="http://www.hyundaiperformance.com/upload/binladen.jpg" border=0>
 

·
Registered
Joined
·
95 Posts
Discussion Starter #10
Damn, this is an old post of me hehe.
Well bodykit--done
lowered-done
engine-will be doen

hehe,still got some questions bout the braking system though.

I want to know, which BIG BRAKE kit can be fitted on my car.
Also, which axles did people use for the swap to power their scoupe.

greets
Bastiaan
www.cardomain.com/id/pancilaan
 
1 - 10 of 10 Posts
Top