Hyundai Forum: Hyundai Performance Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
i'll like your oppinion on this...
i plan to put a t28 garret (for a start) with a upgraded gas pump, a vortex fmu fuel preassure reg. , a turbox 2 stage boost control
a bov, f/a and boost gauge, and i plan to run 5 to 6 psi on a daily basis ( i'm at sales and work in the streets) and 8 to 9 psi to rice!!!
altrouh... i'm going with stock internals
(i did put a new set of rings on the pistons,change my oil pump, and the water pump as well)
i'll need to say that i allready have:
the 1.8 intake cam
underdrive pulley
8.2mm wires
i ported and pullished the head and the intake manifold
and i plan to modify the fuel delivery with the hi-scan (from hyundai) yes i have one...
i have to say that i live in dominican republic
(next to puerto rico) and we had a turbo tib. here with stock internals and only pump, fpr,
boost control and gauges with 10psi all the time and no intercooler!!! or oil cooler (wich i'll have both)
cheuk, your comments ill be as valuable too
thanks.....<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0>
will be killing some hundas butts soon!!!!!!! jajaja...


<hr noshade width=60% size=1 align=left>blow is the way to go.....
 

·
Registered
Joined
·
178 Posts
Russotib -

At only 5 - 6 Psi of boost, your internals should be fine. Boosting the engine to 10PSI on stock internals with stock Compression ratio - I would be very careful with, especially since you use the car every day for work!

Regarding the Hi-scan, I would like to know where and how to acquire one of these units, we have a few tests we would like to do.??


<hr width=60% noshade size=1 align=left>Tiburon Turbo 350KW and 700NM AKA Black Monster
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
Well UFB....
the form we got our dirty hands on it is.....
you know...illigal.... but...
i think you can get one from your local dealer
Anyway....
you can change with it the flow pattern of the
injectors.. to purr more gas at the same nanoseconds or you can increace the nanoseconds rate.... like ...
I want the injectors to open 5.2 times per second instead of the standard 3.2/sec.
Also you can with a program that you can download from hyundai (u have to be a autorize dealer for this) and change the rpm curve, and ingnition...<img src=/images/forums/snitz/smile.gif width=15 height=15 border=0><img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>
i hope i was of help...


<hr width=60% noshade size=1 align=left>blow is the way to go.....
 

·
Registered
Joined
·
178 Posts
Thanks for the info Russotib - unfortunately the agents will never sell this type of tool to the public - I think I have more chance of falling pregnant via wind polination <img src=/images/forums/snitz/laugh.gif width=15 height=31 border=0>

Thanks anyway!



<hr width=60% noshade size=1 align=left>Tiburon Turbo 350KW and 700NM AKA Black Monster
 
1 - 4 of 4 Posts
Top