Hyundai Forum: Hyundai Performance Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
77 Posts
Discussion Starter #1
ok guys... i know there's been a ton of posts on the beta swap, but i have one more question that i don't think has been covered:

in a 2001 ACCENT GS, do you have to replace the wiring harness when performing the BETA swap? I know that you have to do the engine, ECU, tranny, and shorten the axles, but i don't think the harness itself has been covered, so what do you say? I spoke with the service guy at the local hyundai dealership, and he mentioned that the whole harness would have to be replaced. also, he said that a motor from a 2000+ tibby wouldn't work... supposedly it has to be 1999-.

any ideas on this?

later!


<hr noshade width=60% size=1 align=left>H.A.T.E.
hyundai accent tuner evolution
 

·
Registered
Joined
·
21,319 Posts
uhm a '99 and a '00 are the same.

You will have to splice the ECU. When talking to Rob today he said it looks like we will have to extend 1 wire also.(no biggie)

We will be able to post more on this soon.<img src=/images/forums/snitz/thumbup.gif width=25 height=18 border=0>


<hr width=60% noshade size=1 align=left><b>I absolutely positively abhor and verbally bitchslap anyone who starts quoting me their entire car mods as some sort of "Stage".~RED~</b><img src=/images/forums/snitz/wink.gif width=15 height=15 border=0>

<b>WHAT THE F(*)&^#@(*^ IS UP WITH EVERYONE QUOTING OTHERS IN THEIR SIGNATURE??~Nikki~</b>
 
1 - 2 of 2 Posts
Top