Hyundai Forum: Hyundai Performance Forum banner

turbo

1.1K views 6 replies 5 participants last post by  VALKYRIE YB70  
#1 ·
i know their is a lot of kits out their in the lines of a turbo, but i was wondering do all of them have to have an oil return line/oil feed line from the oil pan? If so is their any way i can buy the oil pan with the adapter all ready welded to the pan?:shocked:
 
#2 ·
yeah, get a new pan, bring it to a welder, have them do it.

It's really not hard to do,

take a tapered punch, put it where you want it, and tap with hammer.

Use small small drillbit, drill hole where hole punch is.

go until proper size is achieved.

put new gasket on oilpan, and reinstall, torqueing to the proper specs.
 
#4 ·
Plus, modifying a new one would mean you have no sludge and such on the bottom of it anymore, allways a plus.

Personally, I'd suggest runnning a few oil flushes through there. Gunk 5 minute flush works well. I've also heard someone say that you could use some sort of oil flush to flush out the flush after. x.x I'd suggest running the gunk flush, then flowing some inexpensive oil through it for a bit, then detaching the old pan. Might help to clean out the inside of your engine?

Course, this is all just my opinion. If anyone who knows better could say why this is a good/bad idea? ^^;
 
#7 ·
http://shop.hyundaiperformance.com/

Nick.:)